Patch Cord

Low insertion loss and high return loss patch cord.

Low insertion loss, high return loss

100% factory tested and meet to your specific requirement connector type (LC, MTP, MPO),fiber type in different length options.

GJFJV(H) simplex cable use tight buffer fiber, two layer of aramid yarn as strength member. The cable is with PVC or LSZH sheah

Low insertion loss, good mechanical performance.

The patch cord is made by 2.0mm or 3.0mm simplex or duplex indoor cable and completed with SC. ST. FC or LC connector.

Pre-terminated multi fiber cable solution are complete processing and tested at factory.With MTP,MPO,LC,SC,FC, E2000 and so on.

MPO / MTP cable is designed to high density multifiber solutions,fit for different installation environment and easy to install

GJFJBV(H) zipcord cable use tight buffer fiber, wrapped with aramid yarn, and the cable is completed with PVC or LSZH jacket.

GJFJV(H) simplex cable use tight buffer fiber, a layer of aramid yarn as strength member. The cable is with PVC or LSZH jacket.

MPO / MTP cable is designed to high density multifiber solutions,fit for different installation environment and easy to install

FTTH Patch Cord with SC/APC SC/APC Connector at Both Ends. Length of Cable Can Be Customized.

Cable length is OEM.

Patch Cord with SC/APC SC/APC Connector at Both Ends. Length of Cable Can Be Customized.