Mechanical Fiber Optic Connector-Fiber Pre-embeded ESC250D/APC ESC250D/UPC Fast Connector

Item specifics

Application（ESC250D/APC ESC250D/UPC Fast Connector）

FTTx，Data Room Transformation

E-SC250D Fiber Optic Connector

Cutting 250um fiber 20.85mm, 125um fiber 7.7mm

Technical specification

Cable Scope		3.0 x 2.0 mm and 1.6*2.0mm Bow-type Drop Cable
Size		5197.55mm
Fiber Diameter		125μm ( 652 & 657 )
Coating Diameter		250μm
Mode		SM
Operation Time		about 15s（exclude fiber presetting)
Insertion Loss		≤ 0.3dB（1310nm & 1550nm)
Return Loss		≤ -50dB for UPC, ≤ 55dB for APC
Success Rate		>98%
Reusable Times		>10 times
Tighten Strength of Naked Fiber		>5 N
Tensile Strength		>50 N
Temperature		-40 ~ +85 C
On-line Tensile Strength Test (20 N)		IL ≤ 0.3dB
Mechanical Durability（500 times)		IL ≤ 0.3dB
Drop Test（4m concrete floor, once each direction, three times total)		IL ≤ 0.3dB

Relevant Solutions

Easy operating, The connector can be directly used in ONU, also with fasten strength more than 5 kg, it is widely used in FTTH project of network revolution. It also reduce the use of sockets and adapters, save cost of project.
With 86 standard socket and adapter, the connector makes connection between drop cable and patch cord. The 86 standard socket provides complete protection with its unique design.
Applicable to connection with field mountable indoor cable, pigtail, patch cord and transformation of patch cord in data room and directly used in specific ONU.