12 core Fiber Optic 0.9mm SC SM Singlemode Fiber Optic Pigtail
- Model
- SC/APC pigtail
Item specifics
- Connetor
- SC/APC
- Fiber type
- SM
- Length
- 0.5/1/1/5m or customized
- Delivery
- Within 7 days
- OEM
- Available
Review
Description
FTTH SC/APC Fan-out Fascicular singlemode Optical Fiber Pigtail
Introduction:
Fiber optic pigtail is a piece of fiber optic cable with only one fiber optic connector, it is typically used to link fiber optic cable with other fiber optic equipment. The connector side is mainly in charge of the connections while the other side is melted together with fiber glasses to achieve minimum insertion loss. We provide a full range of fiber optic pigtails, such as SC, SC/APC, ST, FC, FC/APC, LC, LC/APC, E2000 and E2000/APC for both single mode and multi mode. These pigtails can be used with various types of fiber optic terminations, including SC, FC ST, LC, MU, MTRJ, MPO etc.
Description:
Single mode fiber optic pigtails
Available in: SPC (Super Physical Contact), UPC (Ultra Physical Contact) or APC (Angled Physical Contact)
Fiber type: G652D or G657A
Construction of secondary protection: tight or loose
Available in 12 colours of primary and secondary protection
Multi mode fiber optic pigtails
Fiber types: OM1, OM2 and OM3
Construction of secondary protection: tight or loose
Available in 12 colours of primary and secondary protection
Technical parameter
Type
|
Standard,Master
|
Style
|
LC,SC,ST,FC.MU,DIN,D4,MPO, SC/APC,FC/APC,LC/APC.MU/APC
Duplex MTRJ/Female, MTRJ/Male |
Fiber Type
|
9/125 SMF-28 or equivalent (Singlemade) OS1
50/125, 62.5/125 (Multimode) OM2&OM1 50/125, 10G (Multimode) OM3 |
Cable Type
|
Simplex, Duplex (Zipcord)
Φ3.0mm, Φ2.0mm, Φ1.8mm Φ1.6mm PVC or LSZH Φ0.9mm, Φ0.6mm buffered fiber PVC or LSZH |
Polishing Manner | UPC,SPC,APC (8°& 6°) |
Insertion Loss | ≤ 0.1dB (For Singlemode Master) ≤ 0.25dB (For Singlemode Standard) ≤ 0.25dB (For Multimode) Tested by JDS RM 3750 |
Return Loss (For Singlemode) | UPC ≥ 50dB SPC ≥ 55dB APC ≥ 60dB (typ.65dB) Tested by JDS RM3750 |
Repeatability | ±0.1dB |
Operating temperature | -40℃ to 85℃ |
Geometry Requirement (For Singlemode) | Ferrule Endface Radius 7mm ≤ R ≤ 12mm (For APC) 10mm ≤ R ≤ 25mm (For Standard) Apex Offset ≤ 30 μm (For Master) Apex Offset ≤ 50 μm (For Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1 |