Round Indoor Drop Cable Indoor distribution cable; Riser Cable; G657B3 LSZH Tight buffer fiber cable
- Model
- GJFJH
Item specifics
- Fiber Type
- G652D，G657A1，G657A2
- Strength Member
- Aramid Yarn
- OEM
- Available
Review
Description
1.2 Characteristics
A. Tight buffer fiber easystrip
B. Tight buffer fiber has excellent flame-retardant performance
C. Aramid yarn as strength member make cable have excellent tensile strength
D. The jacketanti-corrosion, anti-water, anti-ultraviolet radiation, flame-retardant and harmless to environment etc.
1.3 Cable Application
A. As access cable in access network or premises network;
B. As building cable in premises distribution system, such as shaft cabling, drainage tubes cabling ,trough cabling, wall cabling, ceiling cabling, especially in the environment of high requirements of flexibility and bending properties;
C. Used in communication between outdoor AP and ONT.
1.4 CableProperties
Transporttemperature: - 20 deg C to + 60 deg C
Storage Temperature: - 20 deg C to + 60 deg C
Operating temperature: - 20 deg C to + 60 deg C
Installation temperature: - 5 deg C to + 50 deg C
Fiber Type |
Attenuation |
OFL | Valid mode band width |
10G Ethernet link length SX |
Min. bending radius | |||
Condition | 1310/1550nm | 850/1300nm |
850/1300nm | 850nm | 850nm | |||
|
Typical
|
Max. | Typical | Max. |
|||||
|
Unit
|
dB/km
|
dB/km | dB/km | dB/km | MHZ.km |
MHZ.km
|
m
|
mm |
G652D | 0.36/0.22 | 0.5/0.4 | 16 | |||||
G657A1 | 0.36/0.22 | 0.5/0.4 | 10 | |||||
G657A2 | 0.36/0.22 | 0.5/0.4 | 7.5 | |||||
OM1 | 3.0/1.0 | 3.5/1.5 | ≥500/500 | ≥2000 | ≤300 | 30 | ||
OM2 | 3.0/1.0 | 3.5/1.5 | ≥200/500 | ≥4700 | ≤550 | 30 | ||
OM3 | 3.0/1.0 | 3.5/1.5 | ≥1500/500 | ≥2000 | ≤300 | 30 | ||
OM4 | 3.0/1.0 | 3.5/1.5 | ≥3500/500 | ≥4700 | ≤350 | 30 | ||
3. Packing and shipping
3.1 The cables are packed in wooden drums andthen in carton box
3.2 Standard delivery length is 1km/roll or percustomer’s requirements.
3.3 Sheath Marking
The sheath marking are hotstamped on the sheath at one meter interval with white color. The accuracy ofthe length marking shall be 0 ~ +1%.
Re-marking is yellow color, ifnecessary.
RUX *** xxFIBRE Month/Year XXXXM
l RUX: Manufacturer’s Name
l ***: Customer’s name
l xxFIBRE: Fiber count
l Month/Year: Manufacturedate
l XXXXM: The figure of meter.
