Zipcord Interconnect Cable Indoor distribution cable; G657B3 LSZH Tight buffer fiber cable
- Model
- GJFJBV(H)
Item specifics
- Fiber Type
- SM, OM1, OM2, OM3, OM4, OM5
- Fiber
- Tight Buffer fibre (easy strip or difficult)
- Strength Member
- Aramid yarn (Excellent tensile strength)
- Outer Sheath
- LSZH/PVC (anti-corrosion,anti-water,anti-ultraviolet radiation, flame-retardant
- Cable Diameter (mm)
- 3.4*1.6, 4.0*1.9,5.8*2.8
- Cable Weight (kg/km)
- 4.8-14.8
- Crush Resistance (Long term N/100mm)
- 100
- Crush Resistance (Short term N/100mm)
- 500
- Application
- Duplex Optical Fibre Jumper or Pigtail
- Standards
- YD/T1258.2，
Review
Description
1.2 Characteristics
A. Tight buffer fiber easystrip
B. Tight buffer fiber has excellent flame-retardant performance
C. Aramid yarn as strengthmember make cable have excellent tensile strength
D. Figure 8 structurejacket facilitate embranchment
E. The jacket anti-corrosion, anti-water, anti-ultraviolet radiation, flame-retardant and harmless to environment etc.
1.3 Cable Application
A. Duplex optical fiber jumperor pigtail
B. Indoor riser level andplenum level cable distribution
C. Interconnect between instruments, communication equipment
1.4 CableProperties
Transporttemperature: - 20 deg C to + 60 deg C
Storage Temperature: - 20 deg C to + 60 deg C
Operating temperature: - 20 deg C to + 60 deg C
Installation temperature: - 5 deg C to + 50 deg C
2. Optical Characteristics& Technical Parameters
2.1 Technical Parameters
|
Cable Code
|
Cable Diameter
mm |
Cable Weight(Ref) kg/km | TBF Diameter μm | Tensile strength Long/Short term mm |
Crush Resistance
Long/short term N/100mm |
Bending Radius
Dynamic/Static mm |
|
PVC jacket | LSZH jacket |
||||||
|
GJFJBV(H)-1.6
|
3.4x1.6
|
4.8 | 5.3 | 600±50 | 40/80 |
100/500
|
60/30
|
|
GJFJBV(H)-1.9
|
4.0x1.9
|
8.0 | 8.7 | 900±50 | 100/200 |
100/500
|
60/30
|
GJFJBV(H)-2.8 | 5.8x2.8 | 11.6 | 14.8 | 900±50 | 100/200 | 100/500 | 60/30 |
Fiber Type |
Attenuation |
OFL | Valid mode band width |
10G Ethernet link length SX |
Min. bending radius | |||
Condition | 1310/1550nm | 850/1300nm |
850/1300nm | 850nm | 850nm | |||
|
Typical
|
Max. | Typical | Max. |
|
|
|||
|
Unit
|
dB/km
|
dB/km | dB/km | dB/km | MHZ.km |
MHZ.km
|
m
|
mm |
G652D | 0.36/0.22 | 0.5/0.4 | 16 | |||||
G657A1 | 0.36/0.22 | 0.5/0.4 | 10 | |||||
G657A2 | 0.36/0.22 | 0.5/0.4 | 7.5 | |||||
OM1 | 3.0/1.0 | 3.5/1.5 | ≥500/500 | ≥2000 | ≤300 | 30 | ||
OM2 | 3.0/1.0 | 3.5/1.5 | ≥200/500 | ≥4700 | ≤550 | 30 | ||
OM3 | 3.0/1.0 | 3.5/1.5 | ≥1500/500 | ≥2000 | ≤300 | 30 | ||
OM4 | 3.0/1.0 | 3.5/1.5 | ≥3500/500 | ≥4700 | ≤350 | 30 | ||
3. Packing and shipping
3.1 The cables are packed in wooden drums andthen in carton box
3.2 Standard delivery length is 1km/roll or percustomer’s requirements.
3.3 Sheath Marking
The sheath marking are hotstamped on the sheath at one meter interval with white color. The accuracy ofthe length marking shall be 0 ~ +1%.
Re-marking is yellow color, ifnecessary.
RUX *** xxFIBRE Month/Year XXXXM
l RUX: Manufacturer’s Name
l ***: Customer’s name
l xxFIBRE: Fiber count
l Month/Year: Manufacturedate
l XXXXM: The figure of meter.
