Single Mode 24 Core Fiber Optic Cable Price Per Meter,12 Core Optic Fiber Cable Manufacturers
- Model
- ADSS
Item specifics
- Fiber Count
- 2~144 cores
- Fiber Type
- G652D; G657A
- Central Strength Member
- FRP
- Loose Tube
- PBT
- Outer Sheath
- HDPE
- Strength Member
- Aramid Yarn
- Max. Tensile
- 4KN~34KN
- Attenuation
- @1310nm ≤0.36db/km
- Attenuation
- @1550nm ≤0.22db/km
- Cable Cut-off Wavelength
- ≤1260nm
Review
Description
Cable Description
ADSS cable is loose tube stranded. Fibers,250μm, are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes and fillers are stranded around a FRP(Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
Cable Characteristics
Can be installed without shutting off the power
Excellent AT performance. The maximum inductive at the operating point of AT sheath can reach 25KV
Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops.
Large span lengths and the largest span is over 1000m
Good performance of tensile strength and temperature
The design life span is over 30 years
Cable Applications
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110 kV, PE outer sheath is applied. For power lines equal to or over 110kV,AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
Optical Characteristics
Fiber Type
|
G.652 | G655 |
50/125μm
|
62.5/125μm
|
|
Attenuation(+20℃)
|
@850nm
|
≤3.0 db/km
|
≤3.3 db/km
|
||
@1300nm
|
≤1.0 db/km
|
≤1.0 db/km
|
|||
@1310nm
|
≤3.6 db/km | ≤0.40 db/km | |||
@1550nm | ≤0.22 db/km | ≤0.23 db/km | |||
Bandwidth | @850nm | ≥500MHz.km | ≥200MHz.km | ||
@1300nm | ≥500MHz.km | ≥500MHz.km | |||
Numerical Aperture | 0.200±0.015NA | 0.275±0.015NA | |||
Cable Cut-off Wavelength | ≤1260 nm | ≤1450 nm |
Technical Parameters
Ref.outer diameter mm |
Ref.Weight kg/km | Rec.daily max.working tension kN | Max allowable working tension kN | Break strength kN | Strength member CSA mm2 | Modulus of elasticity kN/mm2 | Heat expansion coefficient *10-6/k | Suitable span (NESC Strandard.m) |
||||
PE sheath | AT sheath | A |
B
|
C
|
D
|
|||||||
10.9
|
85 | 92 | 1.2 | 3 | 8 | 4.2 | 7.0 | 2.0 | 120 |
100
|
110
|
100
|
11.8
|
117 | 124 | 1.5 | 4 | 10 | 4.6 | 7.6 | 1.8 | 160 |
100
|
140
|
100
|
12.0 | 121 | 129 | 2.25 | 6 | 15 | 7.6 | 8.3 | 1.5 | 230 | 150 | 200 | 150 |
12.3 | 126 | 134 | 3.0 | 8 | 20 | 10.35 | 9.45 | 1.3 | 300 | 200 | 290 | 200 |
12.6 | 133 | 141 | 3.6 | 10 | 24 | 13.8 | 10.8 | 1.2 | 370 | 250 | 350 | 250 |
12.8 | 138 | 145 | 4.5 | 12 | 30 | 14.3 | 11.8 | 1.0 | 420 | 280 | 400 | 280 |
13.1 | 145 | 153 | 5.4 | 15 | 36 | 18.4 | 13.6 | 0.9 | 480 | 320 | 460 | 320 |
13.5 | 155 | 163 | 6.75 | 18 | 45 | 22.0 | 16.4 | 0.6 | 570 | 380 | 550 | 380 |
Packingand shipping
The cables are packed in plywood drums.
Standard delivery length is 2km/drum or percustomer’s requirements.
Sheath Marking
The sheath marking are hot stamped or engraved on the sheath at one meter intervalwith white color. The accuracy of the length marking shall be 0 ~ +1%.
Re-marking is yellow color, ifnecessary.
RUX *** xx FIBRE Month/Year XXXXM
l RUX: Manufacturer’s Name
l ***: Customer’s name
l Xx FIBRE: Fiber count
l Month/Year: Manufacturedate
l XXXXM: The figure ofmeter.